Commercial · Industrial · Residential Roofing · Greenville, SCContractor License: SC-121521Roof assistance: 864-800-0806
Completed white TPO roof with skylights and rooftop equipment
This is the completed roof. A new white TPO membrane, a single sheet of tough, flexible roofing, now covers the building and is sealed around every skylight and vent.
← All projects Commercial & Industrial

Large Low-Slope Re-Roof

Commercial roof replacement · TPO

A large commercial building re-roofed section by section: old roofing removed, new insulation screwed down, and a white TPO membrane installed across three different roof areas.

Project specifications

Mechanically Fastened Poly-ISO / .60 MIL TPO- (3 Different Sections, 2 Different Systems, Multiple Different Approaches)

Old roofing was removed where needed. Boards of polyiso, a rigid foam insulation, were screwed to the roof with large round plates; that is what "mechanically fastened" means. A white TPO membrane was then installed over the insulation.

How the job came together

From the finished job back to the start.

01

The finished roof

The completed roof: a white TPO membrane, a single layer of tough, flexible roofing whose seams are heat-welded together. White also reflects much of the summer sun.

Completed white TPO roof field with skylights and vent stacks
The completed white TPO roof, with skylights and vent pipes sealed into the membrane.
Finished white TPO roof with skylights and cones along the safety line
The finished roof from another angle, with skylights and the perimeter safety line.
02

Final details

Skylights, vents and the roof edges are sealed into the new membrane.

Finished white TPO roof with a skylight and perimeter safety cones
A skylight sealed into the finished white roof.
New white TPO roof running to the roof edge beside a large tree
The new roof carried all the way to the edge of the building.
03

Installing insulation and the new membrane

Boards of polyiso, a rigid foam insulation, go down first, screwed to the roof with large round plates. Insulation keeps heating and cooling from escaping through the roof and gives the membrane a firm, even base. The white TPO membrane is then rolled out over it and fastened along its edges.

White TPO membrane rolls laid out beside the existing black roof
Rolls of white TPO membrane laid out next to the old black roof as the new roof moves across it.
New white membrane section meeting the existing black roof behind a shingled mansard
A finished section of new white membrane beside the existing black roof, behind the building's shingled mansard trim.
Freshly installed white TPO field with membrane rolls and skylights
A freshly installed field of white TPO membrane, with more rolls ready and the skylights already worked in.
Fastened insulation boards across a large roof section with skylight openings
Insulation boards screwed down across a large area, with openings left for the skylights.
Roofer fastening along the edge of a new white membrane section
A roofer fastens along the edge of a new membrane sheet. The row of round plates holds the roof down.
04

Removing the old roofing

On the sections being torn off, the old roofing and gravel came off first. That exposed what was underneath, including rusted areas of the steel deck.

Old roof surface with fastener plates exposed where insulation boards were removed
The old roof surface after the insulation came off. The round marks are where the old fasteners held it down.
Crew clearing gravel with power equipment beside stacked insulation
Crew clearing the old gravel from the roof with power equipment, next to stacks of new insulation.
Corroded steel deck flutes uncovered during the tear-off
Rusted steel roof deck uncovered once the old roofing was removed.
05

Before the work

The roof had different surfaces in different areas: smooth black roofing with skylights on one section and gravel on another. That is why each of the three sections needed its own approach.

Insulation pallets and skylights on the large black low-slope roof before re-roofing
The large black roof section before the new roof, with pallets of insulation staged near the skylights.
Gravel-surfaced roof with perimeter cones before tear-off
The gravel-covered roof section before tear-off, with safety cones along the edge.
Project photos

Every photo from this project

40 photos, grouped by stage. Swipe or use the arrows; select a photo to see it full size.

The finished roof

Completed white TPO roof with skylights and rooftop equipment
1 / 3The completed white TPO roof, with skylights and safety cones still in place.
Completed white TPO roof field with skylights and vent stacks
2 / 3The completed white TPO roof, with skylights and vent pipes sealed into the membrane.
Finished white TPO roof with skylights and cones along the safety line
3 / 3The finished roof from another angle, with skylights and the perimeter safety line.
1 / 3

Final details

Finished white TPO roof with a skylight and perimeter safety cones
1 / 2A skylight sealed into the finished white roof.
New white TPO roof running to the roof edge beside a large tree
2 / 2The new roof carried all the way to the edge of the building.
1 / 2

Installing insulation and the new membrane

Freshly installed white TPO field with membrane rolls and skylights
1 / 18A freshly installed field of white TPO membrane, with more rolls ready and the skylights already worked in.
Fastened insulation boards across a large roof section with skylight openings
2 / 18Insulation boards screwed down across a large area, with openings left for the skylights.
Roofer fastening along the edge of a new white membrane section
3 / 18A roofer fastens along the edge of a new membrane sheet. The row of round plates holds the roof down.
White TPO membrane rolls laid out beside the existing black roof
4 / 18Rolls of white TPO membrane laid out next to the old black roof as the new roof moves across it.
New white membrane section meeting the existing black roof behind a shingled mansard
5 / 18A finished section of new white membrane beside the existing black roof, behind the building's shingled mansard trim.
Fastened insulation board along a roof edge during the re-roof, seen from above
6 / 18Looking down at the roof edge: new insulation boards are screwed down with round plates before the membrane goes on.
Roofer working at a roof edge beside new fastened insulation board
7 / 18A roofer works at the roof edge beside newly fastened insulation boards.
Fastened insulation boards and tools on the black roof near a skylight
8 / 18New insulation boards fastened over the black roof near a skylight, with tools and materials nearby.
Insulation board with fastener plates next to the edge of the new membrane
9 / 18Insulation boards and their fastening plates, right next to the edge of finished membrane.
Rolls of white TPO membrane staged on a newly covered roof section
10 / 18Rolls of TPO membrane staged on a section that has already been covered.
New white membrane section meeting the old gravel roof at the warning line
11 / 18The new white membrane meets the old gravel-covered section, which is next in line.
New white TPO membrane extending across the large roof
12 / 18New white TPO membrane stretching across a large part of the roof.
White membrane installed on a low-slope section behind a shingled mansard edge
13 / 18Another roof area covered in the new white membrane, finished up to the mansard edge.
Low-slope roof edge with a safety warning line and flags at the start of the re-roof
14 / 18A safety line and flags mark the roof edge while crews work on a section already covered in new white membrane.
White membrane roof section with tarped materials and a ladder hoist at the edge
15 / 18A lower section in new white membrane, with tarped materials and the ladder hoist at the edge.
Black low-slope roof after rain, with new white membrane in the foreground
16 / 18The old black roof after rain, with a finished strip of new white membrane in the foreground.
Crew installing new roofing beside rooftop equipment and a metal wall
17 / 18Crew members install new roofing on a lower section next to rooftop equipment.
Tarped materials staged on a white membrane roof above the loading docks
18 / 18Materials covered with tarps on the new white membrane, so they stay dry until they are used.
1 / 18

Removing the old roofing

Crew clearing gravel with power equipment beside stacked insulation
1 / 10Crew clearing the old gravel from the roof with power equipment, next to stacks of new insulation.
Corroded steel deck flutes uncovered during the tear-off
2 / 10Rusted steel roof deck uncovered once the old roofing was removed.
Old roofing removed around skylights, exposing the substrate
3 / 10Old roofing cut away around skylights, exposing the surface below.
Gravel cleared from a section of the old roof, exposing the felt beneath
4 / 10A patch of roof cleared of gravel, showing the old roofing felt underneath.
Torn-off low-slope roof area around a skylight, with work in progress
5 / 10Old roofing removed around a skylight while new materials go down nearby.
Roofer on a torn-off low-slope section with old fastener plates exposed
6 / 10A section with the old roofing taken off, ready for new insulation.
Old roof surface with fastener plates exposed where insulation boards were removed
7 / 10The old roof surface after the insulation came off. The round marks are where the old fasteners held it down.
Roll-off dumpster at the loading docks below the low-slope roof during tear-off
8 / 10A roll-off dumpster at the loading docks collects the old roofing as it comes off.
Scissor lift and work truck at the building's loading docks
9 / 10A scissor lift and work truck staged at the loading docks to move crews and materials.
Crew loading roofing materials onto the roof with a ladder hoist
10 / 10A ladder hoist carries roofing materials from the truck up to the roof.
1 / 10

Before the work

Gravel-surfaced roof with perimeter cones before tear-off
1 / 5The gravel-covered roof section before tear-off, with safety cones along the edge.
Insulation pallets and skylights on the large black low-slope roof before re-roofing
2 / 5The large black roof section before the new roof, with pallets of insulation staged near the skylights.
Large black low-slope roof with skylights and a flagged warning line
3 / 5The existing black roof section and its skylights, marked off with a flagged safety line.
Ponding water on the existing black low-slope roof
4 / 5Standing water on the old black roof, before it was replaced.
Gravel roof edge with safety cones above a truck parking area
5 / 5The gravel-covered roof edge before work began on that section.
1 / 5

More project photos

Warehouse interior beneath the roof, with steel joists and lighting
1 / 2Inside the building: the steel roof structure that the new roof protects.
Metal-sided warehouse with a work truck at the loading door
2 / 2The building from ground level, with a work truck at the loading door.
1 / 2
Estimates

Have a roof
like this one?

Send us the details. OTC Roofing will inspect it and tell you what it needs.

Call864-800-0806
HoursMon – Fri: 8:00 AM – 6:00 PM
Saturday: 9:00 AM – 3:00 PM
Sunday: Closed
Service areaGreenville & Upstate South Carolina

Request a roofing estimate

Tell us about the property. Fields marked * are required. We currently serve properties in South Carolina only. We reply by phone or email to schedule.

Property type *
Add roof size, timeline and project details (optional)

Prefer to talk? Call 864-800-0806. Your details are used only to respond to this request.