Commercial · Industrial · Residential Roofing · Greenville, SCContractor License: SC-121521Roof assistance: 864-800-0806
White single-ply roof with a rooftop unit on curbs, walkway pads and gas-line supports
This is what finished rooftop accessories look like: heating and cooling equipment raised on curbs, gray walkway pads marking a safe path, and the gas line resting on supports instead of on the roof.
← All projects Commercial & Industrial

Single-Ply Roof Accessories and Alterations

Rooftop accessories & roof alterations

Raised supports for rooftop equipment, walkway pads, gas-line supports, drains and other changes to existing roofs.

Project specifications

RTU Curbs, Walkway Pads, Gas-Line Supports, etc...

Curbs (raised, sealed frames that hold rooftop equipment), walkway pads, gas-line supports, new drains, pipe seals, decking replacement and custom sheet metal.

How the job came together

The work, by type.

These photos come from several different jobs, so they are grouped by type of work rather than in time order.

01

Finished rooftop accessories

Equipment raised on curbs, gas lines resting on supports and pipes sealed with fitted boots. Keeping equipment and lines off the roof surface means the roof can be sealed around them and inspected easily.

Pipe penetration flashed with a white membrane boot
A fitted white membrane boot seals around a pipe that passes through the roof.
New roof drain with a cast strainer dome on white membrane
A new roof drain with a strainer cover that keeps debris out of the pipe.
New equipment curbs flashed into a black membrane roof
New curbs (raised frames that hold rooftop equipment) sealed into a black membrane roof.
02

Equipment supports and curbs

Curbs and frames lift heavy rooftop equipment off the roof. Some are welded in the shop, some built on site. Gray walkway pads give service crews a path that protects the roof.

Sheet-metal-clad curb on a shingle roof
A raised curb clad in sheet metal on a shingle roof.
Welder fabricating a steel equipment-curb frame in the shop
A steel frame for rooftop equipment being welded in the shop.
Crew framing new wood curb supports on the roof deck
Crew members frame new wood supports for rooftop equipment.
03

Roof alterations

Changes to existing roofs: new drains, replacement decking, metal work and other modifications.

Roof deck opened up for new drains, with the membrane cut back
The roof opened up to install new drains.
Standing-seam metal panels installed above a window during an alteration
Standing-seam metal panels installed above a window as part of an alteration.
New metal decking replacing a section of roof
New metal decking replacing a section of roof.
04

Repairs and preparation

The groundwork before new accessories go in: removing old material, clearing gravel and reworking pipes.

Crew vacuuming gravel from a roof around skylights
Crew vacuuming loose gravel off a roof around the skylights.
Old gutter liner removed in a narrow roof valley, with standing water
An old gutter lining removed from a narrow roof channel, with water standing in it.
Project photos

Every photo from this project

21 photos, grouped by type. Swipe or use the arrows; select a photo to see it full size.

Finished rooftop accessories

White single-ply roof with a rooftop unit on curbs, walkway pads and gas-line supports
1 / 6Finished rooftop accessories on a white single-ply roof: the equipment sits on raised curbs, gray walkway pads mark a safe path, and the gas line rests on supports.
New equipment curbs flashed into a black membrane roof
2 / 6New curbs (raised frames that hold rooftop equipment) sealed into a black membrane roof.
New roof drain with a cast strainer dome on white membrane
3 / 6A new roof drain with a strainer cover that keeps debris out of the pipe.
Pipe penetration flashed with a white membrane boot
4 / 6A fitted white membrane boot seals around a pipe that passes through the roof.
Membrane wrapped over a parapet edge with new coping
5 / 6Membrane wrapped over the top of a short wall and finished with a new metal cap.
Rusted exhaust stack with its base sealed into a white membrane roof
6 / 6A rusted exhaust stack with its base sealed into a white membrane roof.
1 / 6

Equipment supports and curbs

Welder fabricating a steel equipment-curb frame in the shop
1 / 4A steel frame for rooftop equipment being welded in the shop.
Crew framing new wood curb supports on the roof deck
2 / 4Crew members frame new wood supports for rooftop equipment.
Sheet-metal-clad curb on a shingle roof
3 / 4A raised curb clad in sheet metal on a shingle roof.
Roofer at a rooftop unit on a white membrane roof, with membrane rolls staged
4 / 4A roofer at a rooftop unit on a white membrane roof, with membrane rolls ready.
1 / 4

Roof alterations

Roof deck opened up for new drains, with the membrane cut back
1 / 7The roof opened up to install new drains.
New metal decking replacing a section of roof
2 / 7New metal decking replacing a section of roof.
Standing-seam metal panels installed above a window during an alteration
3 / 7Standing-seam metal panels installed above a window as part of an alteration.
New wood roof deck installed on a small roof area
4 / 7New wood decking installed on a small roof area.
Roofer installing new wood decking around a roof drain
5 / 7A roofer installs new wood decking around a roof drain.
Metal roof deck at night with skylight framing opened up
6 / 7A metal roof deck at night, with framing opened up for skylights.
Custom sheet-metal sill flashing under a window
7 / 7A custom-made metal flashing piece under a window, directing water away from the opening.
1 / 7

Repairs and preparation

Crew vacuuming gravel from a roof around skylights
1 / 4Crew vacuuming loose gravel off a roof around the skylights.
Old gutter liner removed in a narrow roof valley, with standing water
2 / 4An old gutter lining removed from a narrow roof channel, with water standing in it.
Pipe penetrations beneath the roof deck before re-flashing
3 / 4Pipes passing through the roof, seen from below before they were resealed.
Pipe penetration through a wall with a new elbow and flashing
4 / 4A pipe passing through a wall, refitted with a new elbow and flashing.
1 / 4
Estimates

Have a roof
like this one?

Send us the details. OTC Roofing will inspect it and tell you what it needs.

Call864-800-0806
HoursMon – Fri: 8:00 AM – 6:00 PM
Saturday: 9:00 AM – 3:00 PM
Sunday: Closed
Service areaGreenville & Upstate South Carolina

Request a roofing estimate

Tell us about the property. Fields marked * are required. We currently serve properties in South Carolina only. We reply by phone or email to schedule.

Property type *
Add roof size, timeline and project details (optional)

Prefer to talk? Call 864-800-0806. Your details are used only to respond to this request.